News For This Month: Driveways

Why Hire A Contractor To Pave Your Driveway

A driveway that is paved offers a lot of advantages over a driveway made of gravel. It does not only look good, but at the same time maintenance is a lot easier. You can also avoid your car getting scratched or damaged by a gravel or stone. Having your driveway paved is not an easy job, it is also quite expensive at the same time.

That is the reason why you should always consider hiring the best contractors to do the paving of your driveway. And it is very important that you should know what are the things involved in driveway paving in order for you to know what to look for in a bid from a contractor.

The prep work is considered to be the most important factor that you should look into when you are looking to have a paving job on your driveway. You have to make sure that the driveway is poured on a well prepared base. It is important that you should let the contractor that you hired know about this important matter. There are some companies that in most cases will provide you a cheaper bid because they will not be performing this task properly. You will usually have a paved driveway that will not last long if you choose to hire a cheap contractor to do the paving job.

You will need to excavate the are of the base where you will pour on your driveway so it will properly cost you a lot more money because having a deep excavation is not that simple. The driveway will then need a six to eight inches of mass that will serve as the sub-base. This will be the support of the actual driveway so it is very important to do this process the right way. It is important that the sub-base should be well compacted and that it allows a proper drainage of water. You should always make sure that the bid given by the contractor will include this project and amount of mass and the depth should be specified in the bid.

The next part of the paved driveway is the base layer that should have a thickness of at least two inches. You should always see to it that the bid given by the contractor will provide the specific numbers regarding the thickness of the base layer which should be at least two inches. If you don’t, you will only find out that the contractor will pour two inches of asphalt and will compact it into a smaller amount. The base layer of your paved driveway should be at least two inches thick in order for it to support the total weight of your vehicle.

The Essentials of Paving – Getting to Point A

How I Became An Expert on Paving